New Products


	NEW - Rear Bumper Pack

	New designed rear post and mount incorporating a hand wheelie bar and handy carry handle. BS106 £4.50 plus VAT

Single leg scratch bars offer more flexibility so that the bike is less disturbed by surface roughness such as corner markers, and also by their nature are mounted further back on the bike than the loop type and tend to give more steering to the bike. Two types were evident at the World Championships, one with mini wheels, and one with a plastic ball on the end of the rod to take the extra wear. The rules state that if mini wheels are used they must not offer any grip to improve cornering, so it is common to use a ball race as the wheel. We have developed two types of scratch bar, see below:


	BS102 - Plastic Ball End Mono Scratch Bar - £4.31 plus VAT

This is a complete kit of parts to make up a pair of plastic ball end scratch bars to any suitable length. All components are available separately as spares. Scratch bars need to be fixed to their holders at the bike end.


	BS99 - Ball Raced Mono Scratch Bar - £6.10 plus VAT

This is a complete kit of parts to make up a pair of ball raced scratch bars to any suitable length. All components are available separately as spares. Scratch bars need to be fixed to their holders at the bike end.


	BS100 - Drilling Jig for Scratch Self Made Bars - £3.64 plus VAT


	BS14 - 4 New Headstock £39.51 plus VAT

	This head stock has been specially developed for our team drivers to provide sharper cornering at higher speeds. The design also incorporates double ball races top and bottom to reduce the possibility of crash damage to the bearings and the adjustable steering stops. It is not recommended for novice or intermediate drivers. We have produced a small batch of these and they are packaged with 4 x ball races. Price is £39.51 exclusive of tax. The standard head stock BS14a will continue to be supplied in the Kits.


	1/5 scale Lightweight Alloy Racing Wheels £35.63 plus VAT


			The wheels are CNC machined from high quality alloy (6161). They are anodised satin silver. This gives a very attractive durable finish but it also takes painting very well. The front wheel has a hexagon drive for the brake disk on one side and the Thunder Tiger 5 dimple fitting on the other side. Front wheel weighs 62gms Rear wheel weighs 85gms. They are sold as a set of one front and one rear wheel for only £35.63 plus VAT if necessary. Product code BS80. Normal trade terms apply.