Shop_NRregularRollover_1
kpbanner

KP07 model

Following the success of the new KP07s series that the team ran in the 2007 World Championships, we are immediately making them available in addition to the standard KP07. They will cost a little more than the KP07 but they have the quick change battery unit, a longer lay shaft extra. Also available is a conversion kit, KP08s, to update earlier model KP07.
kp07s202
kp07s102
kp08s

Conversion set to update the original KP07 to the new short wheel base version with the modified geometry. Kit includes all parts shown except the motor mounting plate which comes as an extra and can be chosen from either the BS39 or BS40 to suit the appropriate motor.
bs43
bs39 bs40
wp369aee26

Set of 4 alloy holders with screws and a pair of nylon bars. These out last the conventional wire scratch bars and are easier to replace.

The alloy front brake has been improved by introducing a micrometer adjustment disk stabilising screw,(for the TT) to prevent the disk migrating off the wheel drive. Particularly needed for the TT hub.