KP Designs - Alloy Wishbones

Hydraulic Brakes

Alloy Wishbones

Front Suspension

Rear Suspension

© KP Designs 2001

Alloy Wishbones

All KPD wishbones are CNC machined from high grade alloys and balance strength and lightness in designs that enhance both the appearance and robustness of any car. They are then anodised in either red or clear colours, which adds strength whilst making them easy to clean. The range is constantly growing.
	Special front wishbones for FG Leopard extended by 25mm for increased stability. KPD087a upper pair KPD088a lower pair fitted with rose joints Takes standard a/roll bar.
	Front wishbone set for FG Marder Race. - KPD093-1 full set of 4 wishbones. KPD092 lower wishbone set KPD091-1 upper wishbone set.
	Front wishbone set for FG Marder. - KPD093 full set of 4 wishbones. KPD092 lower wishbone set (2). KPD091 upper wishbone set (2)
	Front wishbone set for FG Leopard. - KPD089 full set of 4 wishbones with anti roll bar kit. KPD090 lower wishbone set (2). KPD087 upper wishbone kit (2)

	Wishbone set front lower for Lauterbacher KPD086 A set of left and right hand wishbones, machined from bar stock and fitted with hardened steel rose joints, pivot pins, bushes, spacers and 'E' clips, to take the existing anti roll bar and give greater strength and reliability.

Photos are of pre production version	Photos are of pre production version
	F1 Front Wishbones for FG KPD070 & KPD071 or full set KPD085 CNC machined from high grade bar stock alloy, black anodised for realistic appearance and fitted with 3 hardened steel rose joints in each wishbone for maximum reliability. The lower wishbones come with a preset 17 degrees of caster and adjustable camber. With the addition of the CNC machined from solid one piece front upright KPD045 the front end becomes virtually bullet proof.

	Wishbone/Anti-roll bar set for Standard FG rear lower. KPD082 for 1/5 & KPD083 for 1/6 CNC machined wishbones from high quality bar stock alloy, hard anodised for maximum durability, and fitted with hardened steel inserted rose joints for reliability, outboard toe adjustment to make setting up easy, and a really powerful adjustable anti roll bar that really works. Supplied with screws and pivot pins spacers and dust shield as shown.
	Wishbone/Anti-roll bar set for Standard FG front lower KPD084 A matching set of wishbones with all the relevant above features to reduce the number of failed races caused by plastic ball joints.
	Wishbone/Anti-roll bar set for FG KPD060 & anti roll bar KPD096 Powerful adjustable hardened steel anti roll bar that really works. Wishbones fitted with Lauterbacher plastic ball joints with clever support fingers to reduce ball joint damage.


	KPD025 Front Lower Wishbone For FG Standard & HARM The wishbone is supplied complete with a high tensile 8mm stud bonded into the wishbone and fitted with a Lauterbacher red trunnion moulding. The ball joint is cleverly supported by the wishbone extension to reduce damage. Supplied complete with grub screws. The wishbone is suitable for the new or old style FG anti roll bar. Anodised in a tungsten colour.

	KPD026 Front Upper Wishbone For FG Standard & HARM The wishbone shape has been changed to accommodate the new larger shocker. It is tapped with a left hand thread, and is used with the FG trunnion and locking nut. Now supplied complete with grub screws. Anodised in a tungsten colour.Also available is KPD026x which is similar in apearance but is 7mm shorter.

	KPD022 Front Upper or Lower Wishbone For FG CLK This wishbone fits all CLK models in the upper position, and the older types in the lower position. Greatly reduces the tramping that the CLK has in fast corners. Also available is KPD022A, which is almost identical but can take the new style FG anti-roll bar.

	KPD023 & KPD023A Alloy bulkheads For FG front suspension These bulkheads type's 'A' for front and 'B' for rear remove all the flex in the suspension, and greatly improve handling. They are machined to take both the new and old style anti-roll bars, and are now fitted with replaceable white metal bearings. Anodised in a red colour.

	KPD024 Stainless Steel Pivot Pins FG & HARM These pins for the front suspension of FG & Harm, eliminate the fiddly 'E' clips, and as they are made of stainless steel they are more resistant to bending.

Top of Page